crushermachine169

crushermachine169
Male 27 y.o.

Newsfeed

  • crushermachine169
    Everyone in the use of [url=http://www.ht-rent.net/...ll/raymond-mill.html]raymond mill[/url], certainly know to maintain the grinding ring, roller, blade, and these materials directly contact with the wearing parts, usually ignore other factors, the use of mill friends know, the voltage The use of equipment is also affected, then the mine work when the voltage instability will be how? What's wrong? Let's take a look at it.Everyone in the use of [url=http://www.ht-rent.net/...ll/raymond-mill.html]raymond mill[/url], certainly know to maintain the grinding ring, roller, blade, and these materi...See more
  • crushermachine169
    Finished fineness is the production of [url=http://www.ht-rent.net/...-ultrafine-mill.html]ultrafine mill[/url], the daily inspection of another quality indicators. The fineness of the powder is usually sieved with the "sieve" of the "standard sieve" and is expressed as a percentage of the total amount of the product through the sieve (ie, the sieving rate). The higher the sieving rate, the finer the product The more production. Unit power consumption productivity can be more realistic from the energy point of view reflects the ultrafine grinding machine work, therefore, can be linked to productivity and productivity evaluation equipment work.Finished fineness is the production of [url=http://www.ht-rent.net/...-ultrafine-mill.html]ultrafine mill[/url], the daily inspection of another quality indicators. T...See more
    Sep 19
    0 0
  • crushermachine169
    Raymond Mill's dust bag method
    The role of Raymond's dust bag is to filter dust or to control the air flow. It is not a wearable part in the [url=http://www.ht-rent.net/...ll/raymond-mill.html]raymond mill[/url] system. However, the dust bag is worn during use, so it also has a service life.
    Raymond Mill dust bag used as follows:
    1. When the material is crushed by Raymond Mill, the resulting dust flow and friction are strong, will directly wear dust bag, reduce service life. In the common dust, aluminum powder, silicon powder, coke powder, charcoal powder, sintered ore powder and other high-loss dust, Raymond machine users should choose a good wear resistance of the filter fabric. According to the experience, the wear parts of the dust bag are concentrated in the lower part of the dust bag, because the upper air flow rate of the dust bag is low and the dust concentration in the gas is low, so the wear probability is relatively low.
    2. Sometimes the dust on the dust bag will also be burned and burned out of the dust bag. Dust burning is usually caused by friction spark or explosion sparks, static sparks, hot particles, etc., which charge the greatest harm. This is because the chemical fiber filter is usually easy to charge, if the dust at the same time charge is easy to produce sparks, so for flammable and easy charge of dust, etc., should choose flame retardant filter and conductive filter.
    3. When the weather is humid and the moisture content in the air is high, the powder on the dust bag is easily reunited with small water molecules, and it takes a long time to accumulate. The dust bag can not be ventilated. It will be under the action of air pressure was broken. So, every day after the repair of the mechanical parts of raymond mill, but also need to beat the dust bag with a stick, so that the powder accumulated in the dust bag off to extend the life of dust bag.
    Raymond Mill's dust bag method
    The role of Raymond's dust bag is to filter dust or to control the air flow. It is not a wearable part in the [url=http://www.ht-rent.net/...See more
    Sep 18
    0 0
  • crushermachine169
    In the mineral processing industry, [url=http://www.punkdogwine.com/...ll-manufacturer.html]Ore Milling Equipment[/url] is widely used in metal and non-metallic mining, building materials and other departments grinding a variety of ore or rock. Mine ball mill cylinder diameter of 900 ~ 2100mm, the main bearing with spherical tile bearings, the cylinder diameter of more than 2700mm is a fully enclosed self-aligning heart, 120 & deg; rocker type bearings, using high lead low low hardness bar Of the alloy, which buried under the water cooling water pipe, bearing with static pressure structure, the use of high and low pressure joint station lubrication. The main bearing and the outside of the seal with a piston ring, with rubber and grease to achieve a good seal, mine ball mill in the structure using a large gear radial seal and automatic spray lubrication and other new technologies.In the mineral processing industry, [url=http://www.punkdogwine.com/...ll-manufacturer.html]Ore Milling Equipment[/url] is widely used in metal and non-metalli...See more
    Sep 18
    0 0
  • crushermachine169
    Sand making, sand and gravel sanding process is more common in a class of sand making equipment, according to its scope of application and investment costs, can be divided into fixed sand and mobile [url=http://www.canadacrusher.com/...-making-machine.html]sand making machine[/url] two. Based on this, then how do different types of construction projects choose the right sand making machine?Sand making, sand and gravel sanding process is more common in a class of sand making equipment, according to its scope of application and investment costs, can be divided into fixed sand and mobile [url=See more
    Sep 15
    0 0
  • crushermachine169
    In the initial treatment of garbage generated in the building, because many buildings are not concentrated, resulting in a lot of construction waste is not enough concentration. Therefore, when setting up the factory, the dispersion of construction waste also need to be considered, so as to improve the processing efficiency. Otherwise it will take a long distance and time to transport, so not only increase the cost of transport, but also lead to secondary pollution. So the mobile recycled aggregate production model will become the future [url=http://www.ht-rent.net/...n-waste-crusher.html]Construction waste crusher[/url] equipment, an important direction of development. In the scene of the construction of construction waste, people will be able to initially deal with these garbage. And then to the aggregate depth processing center to transport the processed recycled aggregate and then complete the corresponding treatment. This will not only reduce transportation costs, but also reduce its impact on the environment.In the initial treatment of garbage generated in the building, because many buildings are not concentrated, resulting in a lot of construction waste is not enough concentration. Therefore, when setting up the factory, the dispersion of construction waste also need to be considered, so as to improve ...See more
    Construction Waste Crusher | Construction waste crushing production line
    Construction Waste Crusher | Construction waste crushing production line
    According to the construction waste construction process of construction waste in the concrete, waste bricks, stones and other processing and processing, in order to achieve resource recycling....
    Sep 14
    0 0
  • crushermachine169
    when the machine repair or other personnel need to interfere with the situation occurs, the manual mode can be used to manually control the rapid clutch, fine adjustment, correction set rolling distance, transfer information. [url=http://sbmcrushersale.com/product/raymond-mill.html]raymond mill[/url] grinding distance control system a. Design principle to adjust the rolling distance of the same function: roller trajectory of the same b. The overall design of the entire rolling distance adjustment system consists of rod assembly, fixed bearing, loose spring, movable bearing, guide, eccentric sleeve components, hanging angle, connecting rod, stepper motor, torque limiter and electric cylinder composition. Electromechanical grinding and grinding distance adjustment system still has all the functions of gas control grinding and grinding distance adjustment system.when the machine repair or other personnel need to interfere with the situation occurs, the manual mode can be used to manually control the rapid clutch, fine adjustment, correction set rolling distance, transfer information. [url=See more
    Sep 12
    0 0
  • crushermachine169
    Forming milling process preparation: the internal gear forming Raymond Mill is the use of Siemens 802C Raymond Mill system, Raymond Mill system programming methods are mainly two ways: one is the computer programming, it can be online programming Can also be programmed offline, through the use of special software on the computer to prepare the workpiece program, and then through the RS232 interface into the Raymond Mill system machine saved in the processing program memory, the processing can be transferred to achieve automatic processing: the other is manually entered Programming, that is, by the programmer from the machine Raymond Mill system operating panel manual input processing procedures. As the internal gear forming grinding process is relatively simple, easy programming, we use manual input programming. According to the principle of the forming process of the [url=http://sbmcrushersale.com/product/raymond-mill.html]raymond mill[/url] grinding machine, the parameters of the gear to be machined and the machining precision requirements, the logic block diagram of the machining gears is drawn first. In order to better ensure the symmetry of the left and right tooth surface, with the shape of the Raymond grinding surface grinding grinding gear on the left and right two tooth surface, in a repair after grinding the left and right two tooth surface is conducive to Guaranteed size consistency. In the process of grinding, if found Raymond mill wear, to timely use of the diamond wheel for Raymond grinding dressing.Forming milling process preparation: the internal gear forming Raymond Mill is the use of Siemens 802C Raymond Mill system, Raymond Mill system programming methods are mainly two ways: one is the computer programming, it can be online programming Can also be programmed offline, through the use of sp...See more
    Sep 11
    0 0
  • crushermachine169
    The powder production line is mainly non-flammable and explosive materials, such as barite, calcite, potassium feldspar, talc, marble, limestone, ceramics and other Mohs hardness of not more than 7, humidity below 6% And other materials of the milling process. The general configuration of the milling production line includes: [url=http://www.ht-rent.net/...ll/raymond-mill.html]Raymond Mill[/url] mainframe, analysis machine, blower, products cyclone separator, pipeline equipment, motor and auxiliary equipment jaw crusher, hoist, electromagnetic oscillation feeder, electric control cabinet and so on. Raymond Mill in the entire production line to make the material into a part of the product powder, but also a key part of the milling technology.The powder production line is mainly non-flammable and explosive materials, such as barite, calcite, potassium feldspar, talc, marble, limestone, ceramics and other Mohs hardness of not more than 7, humidity below 6% And other materials of the milling process. The general configuration of the millin...See more
    Sep 11
    0 0